Ultra Spec^® Masonry Products

A high-build, elastomeric coating that is designed to beautify and protect masonry structures from damage due to weathering and moisture intrusion. When applied as directed, at up to 20 mils wet film thickness per coat, this product fills pores and bridges minor surface cracks to create a monolithic film that protects masonry from the weather's deteriorating effects.

• Reduces the porosity of masonry surfaces
• Breathable finish allows interior moisture to escape without damage to the film
• Provides a waterproof finish that protects structures from moisture damage
• Provides a mildew-resistant coating
• 200% elongation
• Bridges cracks up to 1/32"
• Provides excellent surface adhesion
• High Alkali Resistance - pH 13
• Higher hiding
• Tintable
• Engineered with Gennex^® Color Technology

Recommended for:
For use on exterior masonry surfaces such as smooth stucco, concrete block, pre-cast concrete, poured in place concrete and tilt-up construction.

A high-build, elastomeric coating that is designed to beautify and protect masonry structures from damage due to weathering and moisture intrusion. When applied as directed, at up to 20 mils wet film thickness per coat, this product fills pores and bridges minor surface cracks to create a monolithic film that protects masonry from the weather's deteriorating effects.

• Reduces the porosity of masonry surfaces
• Breathable finish allows interior moisture to escape without damage to the film
• Provides a waterproof finish that protects structures from moisture damage
• Provides a mildew-resistant coating
• 300% Elongation
• Bridges cracks up to 1/32"
• Provides excellent surface adhesion
• High Alkali Resistance - pH 13
• Higher hiding
• Tintable
• Engineered with Gennex^® Color Technology

Recommended for:
For use on exterior uncoated or new masonry and previously painted surfaces such as smooth stucco, concrete/cinder block, fiber cement siding, pre-cast concrete, poured in place concrete, and tilt-up construction.

A full bodied and high build, latex block filler specially formulated for easy brush, roll or spray application. It may be top-coated with conventional Latex or Alkyd finishes as well as with Epoxy, Aliphatic Urethane, and Quick Dry Enamels.

• Fills small cracks and voids in concrete, cinder block, and rough masonry
• Can be used with either interior or exterior Benjamin Moore finish coatings
• Can be used on exterior masonry surfaces when properly top coated with a Benjamin Moore exterior finish product
• Engineered with Gennex^® Color Technology

Recommended for:
Designed to be used as a preparatory coating to create a less porous, smoother painting surface.

Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13.

• Reduces the porosity of masonry surfaces
• Provides excellent surface adhesion
• Tintable
• High Alkali Resistance - pH 13
• Engineered with Gennex^® Color Technology

Recommended for:
For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction.

• Excellent surface adhesion to provide for better sealing and acceptance of finish coats
• Reduces the porosity of masonry surfaces
• High alkali resistance up to pH 13 or 7 days minimum cure for new concrete
• Provides a mildew-resistant coating
• Appropriate for both interior and exterior use
• May be tinted to light colors with up to 2.0 fl. oz. of Benjamin Moore Gennex^® colorants per gallon