Mildew Resistant

Self Priming

Scuff Resistant

INSL-X® Floor and Masonry Coatings

This product is currently out of stock and unavailable.

WaterBlock® Acrylic Masonry Waterproofer is designed to seal interior and exterior masonry surfaces such as basement walls, foundations, and retaining walls. WaterBlock is alkali-resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco, or tilt-up concrete walls.
  • Seals vertical masonry surfaces
  • Withstands up to 12 psi hydrostatic pressure (when used properly)
  • Provides a mold- and mildew-resistant coating
  • Alkali-resistant
  • View the sell sheet for more information
TuffCrete® Waterborne Acrylic Concrete Stain is a water-reduced acrylic concrete coating designed for application to interior or exterior masonry surfaces. It can be applied in one coat as a stain, or in two coats for an opaque finish.
  • Waterborne acrylic formula
  • Color fade resistance
  • Fast-drying
  • Rugged, durable finish
  • Resists detergents, oils, grease, and scrubbing
  • For interior or exterior masonry surfaces
  • View the sell sheet for more information
TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish.
  • Excellent adhesion
  • Durable low-sheen finish
  • Color fade resistance
  • Quick-drying
  • Deep concrete penetration
  • Superior wear resistance
  • View the sell sheet for more information
Tough Shield® Floor and Patio Coating is a waterborne, acrylic enamel designed to produce a rugged, durable finish with good abrasion resistance. For use on interior and exterior floors and patios, and a variety of other substrates.
  • Outstanding durability
  • 100% acrylic enamel formula
  • Good abrasion resistance
  • Excellent wearing qualities
  • For interior or exterior use
  • View the sell sheet for more information
Easy to use and available in seven different color combinations, these flakes can disguise surface imperfections and help hide dirt.
  • Colorfast, UV stable pigments
  • Optimal flexibility and strength
  • Easy-to-use sprinkle top
GarageGuard® is a water-based, catalyzed epoxy that delivers superior chemical, abrasion, and impact resistance in a durable, semi-gloss coating. Ideal for garage floors, basement floors, and other concrete surfaces. GarageGuard® is cross-linked for outstanding hardness and chemical resistance.
  • Waterborne 2-part epoxy
  • Durable semi-gloss finish
  • Will not lift existing coatings
  • Resists hot tire pickup from cars
  • Recoat in 8 hours
  • Park vehicles in 3-5 days
  • View the sell sheet for more information
TuffCrete® Acrylic Epoxy Bonding Primer is a specially engineered acrylic-epoxy sealer for masonry floors, designed to lock down latent residue on masonry surfaces and provide enhanced adhesion and bonding of finish coats. Ideal for application to garage floors and weathered exterior masonry walkways and patio surfaces.
  • Clear sealer formulated to penetrate and bond to concrete
  • Improves top coat adhesion
  • Locks down latent residue
Hot Trax® is a high-performance, ready-to-use, epoxy-fortified acrylic concrete and garage floor coating that resists hot tire pickup and marring common to driveways and garage floors. Hot Trax® seals and protects concrete from chemicals, water, oil, and grease. This durable, low-satin finish resists cracking and can also be used on exterior concrete, masonry, stucco, cinder block, and brick.
  • Low-VOC
  • Resists hot tire pickup
  • Interior or exterior use
  • Recoat in 24 hours
  • Park vehicles in 5-7 days
  • View the sell sheet for more information
Sure Step® Acrylic Anti-Slip Coating provides a durable, skid-resistant finish for interior or exterior application. Imparts excellent color retention, abrasion resistance, and resistance to ponding water. Sure Step is water-reduced, which allows for fast-drying, easy application, and easy clean up.
  • High traffic resistance
  • Ideal for stairs, walkways, patios, and more
  • Fast-drying
  • Durable
  • Easy application
  • Interior/exterior use
  • Fills and seals minor surface cracks
  • View the sell sheet for more information
Multi-Surface Waterproofer is a penetrating, siloxane-based water repellent. Once fully absorbed and dry, this clear waterproofer will seal and protect the surface without changing its visual appearance or texture.
  • Protects and Seals: Wood, Concrete, Stucco, Brick, Masonry
  • Dries clear with no visible change to substrate
  • Penetrating Siloxane Based Formula
  • View the sell sheet for more information
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Latex
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 92.0
  • Available Colors: Tintable White, Clear (High Gloss), Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, Deep Base, Neutral Base
  • Sheen (or Gloss): Low Sheen
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Interior, Exterior
  • MPI Rating: 58
  • VOC Level: 192.8
  • Available Colors: Clear (High Gloss), Tintable White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand, Saddle Brown, Neutral Base
  • Sheen (or Gloss): Low Sheen
  • Cleanup: Solvent
  • Resin Type: Acrylic
  • Recommended Use: Interior, Exterior
  • MPI Rating: 58,104
  • VOC Level: 670.0
  • Available Colors: Tintable White, Black, Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, Tint Base, Deep Base, Neutral Base
  • Sheen (or Gloss): Satin
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Interior, Exterior
  • MPI Rating: 60
  • VOC Level: 89.6
  • Available Colors: Red Blend, Blue Blend, Brown Blend, Gray Blend, Silver Metallic, Gold Metallic, Black
  • Sheen (or Gloss): N/A
  • Cleanup: Soap and Water
  • Resin Type: Vinyl Acrylic
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level:
  • Available Colors: Showroom Gray, Desert Sand, Tint Base, Neutral Base
  • Sheen (or Gloss): Semi-Gloss
  • Cleanup: Soap and Water
  • Resin Type: Amine Adduct Epoxy
  • Recommended Use: Interior
  • MPI Rating:
  • VOC Level: 210.7
  • Available Colors: Clear
  • Sheen (or Gloss): Primer
  • Cleanup: Soap and Water
  • Resin Type: Acrylic Epoxy
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 95.5
  • Available Colors: Tintable White, Silver Gray, Light Gray, Accent Base
  • Sheen (or Gloss): Satin
  • Cleanup: Soap and Water
  • Resin Type: Epoxy Modified Acrylic
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 47.7
  • Available Colors: Tintable White, Gray Pearl, Light Gray, Tile Red, Pine Green, Desert Sand, Saddle Brown, Accent Base
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic Copolymer
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 132.5
  • Available Colors: Clear
  • Sheen (or Gloss): N/A
  • Cleanup: Soap and Water
  • Resin Type: Siloxane
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 34.8
SDS
TDS
TDS
SDS
TDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
TDS
SDS
TDS

Select a paint sheen above to view detailed info about that product.

Additional information

Related Products

  • ARBORCOAT<sup><small>®</small></sup> Exterior Oil Primer

    Out of Stock

    View Product
  • ARBORCOAT<sup><small>®</small></sup> Classic Oil Finish

    Out of Stock

    View Product
  • ARBORCOAT<sup><small>®</small></sup> Ultra Flat Waterborne Solid Stain

    Out of Stock

    View Product
  • Sure Seal® Latex Primer Sealer

    $16.99$174.99

    View Product
  • INSL-X<sup><small>®</small></sup> Traffic Coatings

    Out of Stock

    View Product