Corotech^® Cleaning, Solvents and Specialty Products

Alkyd Gloss and Hardness Catalyst speeds drying while producing a higher gloss and more corrosion resistance, as well as a harder enamel finish. Other benefits include increased solvent and chemical resistance.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Brushing Reducer is a blend of High Flash Naphtha and Mineral Spirits. Use this solvent to improve the brushing characteristics of single-component, solvent-based coatings.

• For use with all alkyd and oil-modified polyurethane coatings
• Effectively cleans tools and equipment
• May be used to reduce and thin coatings up to the legal limits allowed by district
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Coal Tar Epoxy is a high-solids, two-component tar filled coating formulated to provide excellent film build in one or two coats. The high level of cross-linking provides an excellent barrier coat for immersion service in fresh water, salt water or waste water. Additionally, this product is resistant to many acids, alkalis and mild solvents in splash and spill exposures.

• Formulated for use over properly prepared/primed steel, iron, concrete, and non-ferrous metal
• Provides excellent protection from water, acids, alkalis, and mild solvents
• Can be applied directly to the substrate; use with a primer for extra longevity
• Suitable for use in USDA inspected facilities
• Meets Performance Requirements for Army Corps of Engineers C-200
• Meets Performance Requirements for SSPC Paint 16
• Meets Performance Requirements for DOD-P-23236
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Epoxy Thinner is a carefully balanced combination of the proper solvents for reducing catalyzed epoxy primers and finish coats.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported:N/A

Oil & Grease Emulsifier is designed for cleaning walls, floors and equipment. This cleaner is extremely effective in removing oil, grease, fats, blood and animal by-products. It may also be used for cleaning concrete, asphalt, vinyl, metal, plastic, fiberglass, etc.; it is also very effective for cleaning equipment, tools, brushes, rollers and spray equipment.

• Concentrated and must be mixed with water
• Biodegradable and phosphate-free
• Use on metal, fiberglass, vinyl, and masonry surfaces
• Rinses clean with no residue
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film.

• Chemically converts rust to inhibit corrosion
• Forms a tight chemical bond to rusted surfaces
• Penetrates into tight areas
• Suitable for use in USDA inspected facilities
• Can be top coated with latex, alkyd, urethane, or epoxy finishes
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Urethane Reducer is 100% butyl acetate for use in thinning catalyzed acrylic urethanes. Effective for cleaning equipment immediately after use as well. Do not use this product for cleaning synthetic brushes or rollers, as it will dissolve them.

• For use with all two-part solvent-based urethane coatings
• Effectively cleans tools and equipment
• May be used to reduce and thin coatings up to the legal limits allowed by district
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Waterborne Epoxy Block Filler is a high-solids epoxy block filler that can be cleaned up with soap and water. This product withstands repeated cleanings with high pressure water and can be top coated with most generic type coatings.

• Excellent filling on all masonry and cinder block
• Outstanding water resistance
• Suitable for use in USDA inspected facilities
• Soap and water clean-up
• Resists alkalis and acids
• For helpful information, check out our tools and resources page
• See how Corotech impacts commercial and industrial jobs in our video series

Colorant Used: N/A
Color System Supported: N/A

Xylene is an aromatic solvent that can be used in numerous industrial coatings systems as a general thinner and clean-up solvent. Use to modify evaporation rates and improve dry. For effective cleaning of tools and equipment.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A