Corotech^® Alkyd Primers

Alkyd Fabrication Primer is formulated for use in mild-to-moderate exposures. Its excellent wetting properties allow application to marginally prepared surfaces. Formulated to inhibit corrosion, this primer provides years of protection when applied properly. It can be top coated with most finishes that do not contain strong solvents.

• Dries in 2 hours; recoat in 8 hours
• Excellent wetting properties for maximum penetration
• Designed for structural steel, railings, and shopcoat applications
• Corrosion-inhibiting formula protects against rust
• Suitable for use in USDA-inspected facilities
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Alkyd Shop Coat Primer is a quick-drying formulation that can withstand mild-to-moderate atmospheric conditions. It provides a protective barrier and can be top coated with a variety of finishes, including hot solvent topcoats. It can also be used as a temporary coat for transporting fabricated pieces, which can then be blasted and recoated at the job site. In interior non-corrosive environments, Alkyd Shop Coat Primer can be left uncoated.

• Dry to touch in 30 minutes, recoat in 2 hours
• Provides barrier protection in mild-to-moderate corrosive environments
• For all metal fabricators
• Meets SSPC Paint 15, Type 1 (V133-20 Red)
• Meets CISC/CPMA 1-73a and CISC/PMA 2-75 Specifications
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A

Prep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.

• Fast 30 minute dry – recoat in 4 hours
• Tie coat over many existing coatings
• Corrosion protection on all ferrous metals
• Available in White, Red or Gray
• For helpful information, check out our tools and resources page
• See how Corotech impacts commercial and industrial jobs in our video series

Colorant Used: N/A
Color System Supported: N/A

Shop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.

• Economical protective coat
• Accepts a wide variety of topcoats
• Dry to the touch in 30 minutes
• For helpful information, check out our tools and resources page

Colorant Used: N/A
Color System Supported: N/A