Mildew Resistant

Self Priming

Coronado® Masonry Coatings

This product is currently out of stock and unavailable.

Super Kote 5000® Block Filler is designed specifically for spray application to fill voids and create a smooth, uniform surface on interior masonry block. It is packaged at a sprayable viscosity and is formulated with raw materials selected to minimize tip clogging.
  • Creates a smooth, uniform surface
  • Formulated for minimal tip clogging
  • For application by airless spray
  • Can also be applied by brush
High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces.
  • Breathable, high-build film
  • Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light
  • Allows moisture to pass through without blistering or loss of adhesion
  • Superior durability
  • Provides a mildew-resistant coating
High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces.
  • Breathable, high-build film
  • Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light
  • Allows moisture to pass through without blistering or loss of adhesion
  • Superior durability
  • Provides a mildew-resistant coating
High-build, low-VOC breathable waterproofing coatings designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain, and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass through without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer or filler on smooth masonry surfaces.
  • Breathable, high-build film
  • Passes ASTM D6904 wind driven rain test and protects against salt spray, acid rain, and UV light
  • Allows moisture to pass through without blistering or loss of adhesion
  • Superior durability
  • Provides a mildew-resistant coating
A clear, water-repellent sealer that produces a breathable barrier on masonry. This barrier prevents chlorine penetration and reduces cracking, dirt pickup, efflorescence, and damage from freezing/thawing cycles. Because it is clear, the sealer penetrates deep into substrates without changing their appearance.
  • Clear, invisible barrier
  • Protects vertical and horizontal surfaces
  • Alkali-resistant
  • Non-flammable
Elastite® 100% Acrylic Elastomeric Coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks and moving with the building.
  • Flexible waterproofing membrane
  • 200% elongation rating (applicable lines: 160, 162)
  • 300% elongation rating (applicable lines: 166)
  • Protects against wind driven rain
  • Resists dirt pickup
A waterborne, 100% acrylic penetrating surface sealer and chalk binder designed for all types of masonry substrates. When applied properly, this product will provide a sound foundation for acrylic house paints and elastomeric waterproofing finishes. It may be applied to existing coatings showing a moderate degree of surface chalking or to new masonry surfaces with a pH up to 13.
  • Excellent chalk binding sealer
  • Alkali-resistant
  • Protects against wind driven rain
  • Resists dirt pickup
Designed to penetrate deeply into the pores of masonry surfaces to stop dusting and to form a foundation to support the Elastite® Coating System. An excellent chalk binding sealer resistant to the effects of alkali up to a pH of 13.
  • Excellent chalk binding sealer
  • Alkali-resistant
  • Protects against wind driven rain
  • Resists dirt pickup
Elastite® 100% Acrylic Elastomeric Coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks and moving with the building.
  • Flexible waterproofing membrane
  • 200% elongation rating (applicable lines: 160, 162)
  • 300% elongation rating (applicable lines: 166)
  • Protects against wind driven rain
  • Resists dirt pickup
Elastite® 100% Acrylic Elastomeric Coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks and moving with the building.
  • Flexible waterproofing membrane
  • 200% elongation rating (applicable lines: 160, 162)
  • 300% elongation rating (applicable lines: 166)
  • Protects against wind driven rain
  • Resists dirt pickup
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Polyvinyl Acetate
  • Recommended Use: Interior, Exterior
  • MPI Rating: 4, 4 X-Green™
  • VOC Level: 35.2
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating: 42
  • VOC Level: 20.0
  • Available Colors: White, Deep Base, Accent Base
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Level: 79.0
  • Available Colors: White, Deep Base, Accent Base
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Level: 94.2
  • Available Colors: Clear
  • Sheen (or Gloss): N/A
  • Cleanup: Soap and Water
  • Resin Type: Silicone
  • Recommended Use: Exterior
  • MPI Rating: 117
  • VOC Level: 20.9
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Level: 45.8
  • Available Colors: Clear, White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Level: 141.9
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Level: 174.5
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating:
  • VOC Level: 45.4
  • Available Colors: White
  • Sheen (or Gloss): Flat
  • Cleanup: Soap and Water
  • Resin Type: Acrylic
  • Recommended Use: Exterior
  • MPI Rating: 38
  • VOC Level: 46.9
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS
SDS
TDS

Select a paint sheen above to view detailed info about that product.

Additional information

Related Products

  • Ultra Spec<sup><small>®</small></sup> Professional Prep Coat High Build Latex Primer

    Out of Stock

    View Product
  • Fresh Start<sup>®</sup> Premium Interior Undercoater & Primer/Sealer

    Out of Stock

    View Product
  • Fresh Start<sup>®</sup> Premium Exterior Deck & Siding Primer

    Out of Stock

    View Product
  • ARBORCOAT<sup><small>®</small></sup> Exterior Oil Primer

    Out of Stock

    View Product
  • ARBORCOAT<sup><small>®</small></sup> Classic Oil Finish

    Out of Stock

    View Product